HP StorageWorks 2/32 SAN switch 2/32 version 4.0.x installation guide - Page 39
Securing the Rack Mount Brackets, Attaching the Rear or
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installing the SAN Switch 2/32 . SHR-2577A Figure 7: Sliding the SAN Switch 2/32 into an HP 9000 Series rack 4. To verify proper alignment, slide the switch in and out of the rack. Securing the Rack Mount Brackets Secure the Rack Mount Brackets (installed earlier; see "Attaching the Rear or Front Rack Mount Brackets") to the rack rails, as follows: 1. Locate two Phillips head 10-32 x 3/8 inch screws in the Rack Mount Kit accessory pouch. 2. Secure each rack mount bracket to the rack rails. 3. Tighten the screws, and torque to 25 inch-pounds. SAN Switch 2/32 Installation Guide 39
Installing the SAN Switch 2/32
39
SAN Switch 2/32 Installation Guide
.
Figure 7:
Sliding the SAN Switch 2/32 into an HP 9000 Series rack
4.
To verify proper alignment, slide the switch in and out of the rack.
Securing the Rack Mount Brackets
Secure the Rack Mount Brackets (installed earlier; see “
Attaching the Rear or
Front Rack Mount Brackets
”) to the rack rails, as follows:
1.
Locate two Phillips head 10-32 x 3/8 inch screws in the Rack Mount Kit
accessory pouch.
2.
Secure each rack mount bracket to the rack rails.
3.
Tighten the screws, and torque to 25 inch-pounds.
SHR-2577A