HP StorageWorks 2/32 SAN switch 2/32 version 4.0.x installation guide - Page 54

Optional Configuration Settings, Modifying Domain IDs, Specifying Custom Status Policies

Get HP StorageWorks 2/32 - SAN Switch PDF manuals and user guides View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Installing the SAN Switch 2/32 Optional Configuration Settings The following sections describe how to modify domain IDs and status policies. Modifying Domain IDs Optional. Modify the domain IDs, if desired, as follows. Note: The default domain ID is 1. If the default domain ID is already in use when the switch is connected to the fabric, the domain ID for the new switch is automatically reset to a unique value. The domain IDs that are currently in use can be determined using the telnet command fabricShow. 1. Disable the switch by entering the following: switchDisable 2. Enter the following: configure 3. Enter y after the Fabric parameters prompt. Fabric parameters (y, n) 4. Enter a unique domain ID (such as the domain ID used by the previous switch, if still available). Domain: (1..239) [1] 3 5. Complete the remaining prompts (or press CTRL+D to accept the remaining settings without completing all the prompts). 6. Re-enable the switch by entering the following: switchEnable Specifying Custom Status Policies Optional If desired, specify any custom status policies for the fabric as follows. 1. Enter the following at the prompt. switchStatusPolicySet 2. Specify the desired status policies. To completely deactivate the alarm for a particular condition, enter 0 at the prompt for that condition. 54 SAN Switch 2/32 Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Installing the SAN Switch 2/32
54
SAN Switch 2/32 Installation Guide
Optional Configuration Settings
The following sections describe how to modify domain IDs and status policies.
Modifying Domain IDs
Optional.
Modify the domain IDs, if desired, as follows.
Note:
The default domain ID is 1. If the default domain ID is already in use when the
switch is connected to the fabric, the domain ID for the new switch is automatically reset
to a unique value. The domain IDs that are currently in use can be determined using the
telnet command
fabricShow
.
1.
Disable the switch by entering the following:
switchDisable
2.
Enter the following:
configure
3.
Enter
y
after the
Fabric parameters
prompt.
Fabric parameters (y, n)
4.
Enter a unique domain ID (such as the domain ID used by the previous
switch, if still available).
Domain: (1..239) [1] 3
5.
Complete the remaining prompts (or press
CTRL+D
to accept the remaining
settings without completing all the prompts).
6.
Re-enable the switch by entering the following:
switchEnable
Specifying Custom Status Policies
Optional
If desired, specify any custom status policies for the fabric as follows.
1.
Enter the following at the prompt.
switchStatusPolicySet
2.
Specify the desired status policies. To completely deactivate the alarm for a
particular condition, enter
0
at the prompt for that condition.