HP StorageWorks 2/32 SAN switch 2/32 version 4.0.x installation guide - Page 51
Connecting the SAN Switch 2/32 to the LAN, Area Network LAN segment.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing the SAN Switch 2/32 Connecting the SAN Switch 2/32 to the LAN Use the following steps to connect the SAN Switch 2/32 to the Ethernet Local Area Network (LAN) segment. 1. Remove the shipping plug from the SAN Switch 2/32 Ethernet port. 2. Connect one end of an Ethernet cable to the SAN Switch 2/32 Ethernet port; see Figure 14. Figure 14: Connecting the Ethernet cable SHR-2573A 3. Connect the other end of the Ethernet cable to the workstation or to an Ethernet network containing the workstation. Note: You can now access the switch remotely (and from multiple connections), using telnet or the Web Tools application. Verify that the switch is not accessed from any other connections during the remaining steps. 4. Login to the switch with administrative privileges by telnet. The default administrative logon is admin and the default password is password. SAN Switch 2/32 Installation Guide 51