HP StorageWorks 2/32 SAN switch 2/32 version 4.0.x installation guide - Page 82
Upgrading or Restoring Switch Firmware, The Switch Management Application in Web Tools
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Backing Up the Configuration and Upgrading Firmware Upgrading or Restoring Switch Firmware The SAN Switch 2/32 ships with preloaded firmware. In most cases there is no need to update the firmware on the new switch. The firmware version can be determined by using: ■ The version Telnet command ■ The Switch Management Application page in Web Tools Use these steps to upgrade or restore the switch firmware. 1. Verify that the RSHD service or the FTP service is running on the host workstation. 2. Login to the switch as the admin user. 3. Enter the following command: firmwareDownload hostIPaddr, user, path_filename, password For example, where hostIPaddr is the IP address of the host computer, user is the User ID used to log into this computer, path_filename is the path location and filename of the new firmware file, and password is the password for the user ID specified. The password operand is only required if you are using FTP. 4. Reboot the switch by entering the following command: fastBoot 82 SAN Switch 2/32 Installation Guide