HP StorageWorks 4/16 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 209

A Technical specifications This appendix provides information for both the DC SAN Director and the DC04 SAN Director. Differences in specifications between the products is indicated. The following information is included: • "General specifications" on page 209 • "System architecture" on page 210 • "System size and weight" on page 213 • "System blade and FRU weights" on page 214 • "Facility requirements" on page 214 • "Power specifications" on page 215 • "Power cords" on page 216 • "Environmental requirements" on page 219 • "Fibre Channel port specifications" on page 220 • "Data transmission ranges" on page 222 General specifications The DC SAN Director and DC04 SAN Director are compliant with United States and International safety and Electromagnetic Compatibility (EMC) Electromagnetic Compatibility standards. Table 41 lists the general specifications for the DC SAN Director and DC04 SAN Director. Table 41 General specifications Specification Configurable port types System architecture System processor ANSI fibre channel protocol Modes of operation Fabric initialization FC-IP (IP over fibre channel) Aggregate I/O bandwidth Description F_Port, FL_Port, E_Port, EX_Port, VEX_Port, VE_Port, and M_Port Nonblocking shared memory FreeScale 8548, 1.2 GHz FC-PH (Fibre Channel Physical and Signalling Interface standard) Fibre Channel Class 2, Class 3, and Class F Complies with FC-SW 5.0 Complies with FC-IP 2.3 of the FCA profile DC SAN Director: 6144 Gb/s, end-to-end DC04 SAN Director: 3 Tbps per chassis Port to port latency Less than 2 microseconds with no contention (destination port is free) HP StorageWorks DC and DC04 SAN Backbone Director Switches 209