HP StorageWorks 4/16 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 214
System blade and FRU weights, Facility requirements, Size and weight, System, Weight
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
System Empty chassis: • No blades • No CP blade • No core switch blade • No power supplies • No fan assemblies Size and weight 25.76 kg (56.8 lb.) System blade and FRU weights Table 46 System FRU weights FRU CP blade (CP8) CR blade (CR8, CR4S-8) FC8-16 port blade FC8-32 port blade FC8-48 port blade FC10-6 port blade FR4-18i application blade Port card filler panel Power supply Blower assembly WWN bezel Cable management comb (DC SAN Director) Vertical cable management fingers (DC04 SAN Director) WWN bezel Chassis door Weight 3.0 kg (6.6 lb.) 3.27 kg (7.2 lb.) 3.0 kg (6.6 lb.) without media 3.27 kg (7.2 lb.) without media 3.36 kg (7.4 lb.) without media 3.1 kg (6.8 lb) without media 3.36 kg (7.4 lb) without media 1.5 kg (3.2 lb) 2.45 kg (5.4 lb.) 5.73 kg (12.6 lb.) 0.3 kg (0.6 lb) 0.45 kg (1.0 lb.) 0.45 kg (1.0 lb.) 0.3 kg (0.6 lb.) 2.09 kg (4.6 lb.) Facility requirements The facility where the product is in use must meet the following requirements to provide for correct operation: • Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the chassis nameplate • An air flow of at least 350 cubic feet per minute (595 cubic meters per hour) in the immediate vicinity of the DC SAN Director or DC04 SAN Director 214 Technical specifications