HP StorageWorks 4/16 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 69
Monitoring blower assembly status, Power supply, Table 12 Power supply LED descriptions
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
2. Type psShow to check power supply status. The power supply status displays OK, Absent, or Faulty. If a power supply is absent or faulty, contact HP to order replacement power supply. 1 Figure 23 Power supply 26396a 1. Power LED Table 12 describes the power supply LED patterns and the recommended actions for those patterns. Table 12 Power supply LED descriptions LED pur- Color pose Status Recommended action Power No light (LED is off) Power supply does not have incoming power and is not providing power to the DC SAN Director. Ensure power supply is firmly seated, DC SAN Director has incoming power, both power cables are connected, and AC power switches are on. Steady green Power supply has incoming power and is providing power to the DC SAN Director. No action required Flashing green Power supply is about to fail. Replace power supply. Monitoring blower assembly status To determine the status of a blower assembly: 1. Check the LED indicators on the blower assembly (see Figure 24). The LED patterns may temporarily change during POST and other diagnostic tests; for information about how to interpret the LED patterns, see Table 13. HP StorageWorks DC and DC04 SAN Backbone Director Switches 69