HP StorageWorks 4/16 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 68
Monitoring power supply status, Table 11,
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Table 11 describes the core switch blade LED patterns and the recommended actions for those patterns. Table 11 CR blade LED descriptions LED pur- Color pose Status Recommended action Power Status LINK LED ATTN LED Steady green CP blade has valid power. No action required No light (LED is off) CP blade does not have incom- Ensure blade is firmly seated and has ing power. power. No light (LED is off) CP blade is either healthy or Verify that the power LED is on. does not have power. Steady amber CP blade is faulty or the switch Ensure blade is firmly seated and is still booting. switch has completed booting. If LED remains yellow, contact HP Slow-flashing amber (on 2 CP blade is not seated cor- seconds; then off 2 rectly or is faulty. seconds) Pull blade out and reseat it. If LED continues to flash, replace blade. Fast-flashing amber (on Environmental range ex1/2 second; then off 1/2 ceeded. second) Check for out-of-bounds environmental condition and correct it. No light (LED is off) No ICL or ICL cable present, but no connection. Ensure ICL cable is correctly installed. Steady green ICL connected No action required No light (LED is off) No ICL No action required Blinking amber Attention required Ensure ICL cable is correctly installed. Monitoring power supply status To determine power supply status: 1. Check the LED indicator on the power supply (see Figure 23). The LED patterns may temporarily change during POST and other diagnostic tests; for information about how to interpret the LED patterns, see Table 12. 68 Monitoring DC SAN Director system components