HP Surestore 64 FW 05.01.00 and SW 07.01.00 Director 2/64 Installation Guide ( - Page 103
Create New Alerts
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Installing and Configuring the Director 2/64 ■ A yellow triangle that displays by the Threshold Alerts field in the Port Properties dialog box. ■ Detailed threshold alert data recorded in the Threshold Alert Log. Use the Threshold Alerts option on the Configure menu to configure the following: ■ Name for the alert. ■ Type of threshold for the alert (Rx, Tx, or either). ■ Active or inactive state of the alert. ■ Threshold criteria: - Percent traffic capacity utilized-The percent of the port's throughput capacity achieved by the measured throughput. This setting constitutes the threshold value. For example, a value of 50 means that the port's threshold is reached when throughput is 50% of capacity. - Time interval during which throughput is measured and alert notification can occur. - The maximum cumulative time that the throughput percentage threshold can be exceeded during the set time interval before an alert is generated. ■ Ports for which you are configuring threshold alerts. You can configure up to 16 alerts, and any number of alerts can be active at one time. Use the following procedures to create a new threshold alert, or to modify, activate, deactivate, or delete an alert. Create New Alerts 1. At the Hardware View page, choose Configure > Threshold Alerts. The Configure Threshold Alerts dialog box displays, as shown in Figure 47. Note: If alerts are configured, they will display in table format showing the name of the alert, type of alert (Rx, Tx, or Rx or Tx), and alert state (inactive or active). Director 2/64 Installation Guide 103