HP Surestore 64 FW 05.01.00 and SW 07.01.00 Director 2/64 Installation Guide ( - Page 35
Loopback plug, Fiber-Optic protective plug,
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Overview Figure 5: Loopback plug ■ Fiber-optic protective plug-For safety and port transceiver protection, fiber-optic protective plugs, as shown in Figure 6, must be inserted in all director ports without fiber-optic cables attached. The director is shipped with protective plugs installed in all ports. Figure 6: Fiber-Optic protective plug ■ Null modem cable-An asynchronous RS-232 null modem cable, as shown in Figure 7, is required to configure director network addresses and acquire event log information through the maintenance port. The cable has nine conductors and DB-9 male and female connectors. Director 2/64 Installation Guide 35
Overview
35
Director 2/64 Installation Guide
Figure 5:
Loopback plug
■
Fiber-optic protective plug
—For safety and port transceiver protection,
fiber-optic protective plugs, as shown in
Figure 6
, must be inserted in all
director ports without fiber-optic cables attached. The director is shipped with
protective plugs installed in all ports.
Figure 6:
Fiber-Optic protective plug
■
Null modem cable
—An asynchronous RS-232 null modem cable, as shown
in
Figure 7
, is required to configure director network addresses and acquire
event log information through the maintenance port. The cable has nine
conductors and DB-9 male and female connectors.