HP Surestore 64 FW 05.01.00 and SW 07.01.00 Director 2/64 Installation Guide ( - Page 83
Hardware View with FRU failures), Set Director Date and Time, Hardware View
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Installing and Configuring the Director 2/64 Figure 38: Hardware View page (with FRU failures) Set Director Date and Time The Director 2/64 Product Manager log entries are stamped with the date and time received from the director. Use these steps to set the effective date and time for the director: Note: The director and HAFM synchronize at least once daily. 1. At the Hardware View page for the selected director, click the Configure menu. 2. Choose Date/Time from the drop-down menu. The Configure Date and Time dialog box displays, as shown in Figure 39. Director 2/64 Installation Guide 83
Installing and Configuring the Director 2/64
83
Director 2/64 Installation Guide
Figure 38:
Hardware View page (with FRU failures)
Set Director Date and Time
The Director 2/64 Product Manager log entries are stamped with the date and time
received from the director. Use these steps to set the effective date and time for
the director:
Note:
The director and HAFM synchronize at least once daily.
1.
At the
Hardware View
page for the selected director, click the
Configure
menu.
2.
Choose
Date/Time
from the drop-down menu. The
Configure Date and
Time
dialog box displays, as shown in
Figure 39
.