HP Surestore 64 FW 05.01.00 and SW 07.01.00 Director 2/64 Installation Guide ( - Page 80
HAFM Server, Enabling HAFM to Manage the Director, New Product dialog box
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Installing and Configuring the Director 2/64 HAFM Server To run HAFM software, you must set up and configure the HAFM server. Refer to the HAFM server installation guide for instructions on: ■ Setting up the HAFM server. ■ Connecting the HAFM server to the LAN. ■ Configuring the network addressing for the HAFM server. ■ Setting HAFM server date and time. ■ Creating HAFM user names and passwords. Enabling HAFM to Manage the Director To manage a new director, it must be recognized by the HAFM application. Follow these steps to enable HAFM to recognize a new director: 1. Click the Product menu and choose New from the drop-down menu. The New Product dialog box displays, as shown in Figure 36. Figure 36: New Product dialog box 2. Type the IP address you configured earlier. See "Configure Director Network Information" on page 73 for more information. 3. Choose Director-64 from the Product Type drop-down list and click OK. A new director icon displays at the Products View page. 4. Repeat this procedure for each new director. 80 Director 2/64 Installation Guide