Insignia NS-42E859A11 User Manual (English) - Page 72

68 Using Your TV NS-32E859A11/NS-42E859A11 5 Press S or T to highlight Cable (without a box) or Antenna, then press SELECT. The Channel Scan starts. • If you are using an antenna for a standard or HDTV signal, select Antenna. • If your cable is connected directly to the TV (using no cable box), select Cable (without a box). Scan for Channels Setting up the channel and favorite channel lists You can add, hide, or mark favorite channels in the channel list. To set up the channel and favorite channel lists: 1 Press TiVo. The Home screen opens. Press S or T to select Settings, then press X or SELECT. 2 Press S or T to highlight Settings, then press X or SELECT. Your TV works with either cable or antenna channels. Select the TV signal you have connected to this TV. The TV will then begin scanning for channels, which may take up to 30 minutes. You only need to scan for channels for cable if you are NOT using a cable box. If you have a cable box (or a satellite box), the box already has information about your channels Antenna Cable (without a box) 10:00pm If your cable or satellite TV is connected to your TV through a cable or satellite box, the channel search is not necessary because the cable or satellite box already has the channel information needed to communicate with your TV. Note You can press CLEAR, MENU, or EXIT to stop the channel scan, but you will need to run the channel scan again to create a channel list. Home Settings Connect to the Internet 10:00pm Settings Parental Controls Check for updates Account & system info Help Sleep timer 3 Press S or T to highlight Channels & providers, then press X or SELECT. Settings Appearance Audio Channels & providers Devices Network Recommendations Video Channel list Scan for channels Signal strength 10:00 PM www.insigniaproducts.com