Intel AFCSASRISER User Guide - Page 133
Removing a Drive or Changing the RAID Level of a Virtual Disk
View all Intel AFCSASRISER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Removing a Drive or Changing the RAID Level of a Virtual Disk You can use Intel® RAID Web Console 2 to remove a physical disk drive from a virtual disk. In order to do this, you must be logged on to the system in All Access mode. Warning: Be sure to back up the data on the virtual disk before you change its capacity. 1. Select a Drive Group icon and start the Modify Drive Group, as described in the previous section. 2. Click Remove Drive. Note: Depending on current RAID level, the targeted migrated RAID level and the available Unconfigured Good drive numbers, pop-up window may appear to allow selection among Add drives, Remove drives, and Migrate RAID level. The following screen appears: Figure 72. Selecting Drives to Remove 3. In the panel, check the disk drives that you want to remove from the virtual disk. 4. When you are finished removing disk drives, click Next. The next screen displays, which allows you to review the summary and go back if you need to make corrections as shown in Figure 73. Intel® RAID Software User's Guide 121