Intel AFCSASRISER User Guide - Page 88
Add to SPAN, Select the appropriate Stripe Size, Access Policy, Read Policy, Write Policy, IO Policy
View all Intel AFCSASRISER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
7. Select all arrays or disk groups that are to be spanned in the RAID 10, 50, or 60 array by holding down the key and selecting each array/disk group in the right pane. 8. Click Next. 9. In the next screen, click Add to SPAN to move all arrays from the left pane to the right pane. Use to select all SPANs on the right pane. 10. Click Next. 11. At the Virtual Drive Definition (VD Definition) screen, select either RAID 10, RAID 50, or RAID 60 from the RAID Level drop-down. RAID 10 is illustrated below. 12. Select the appropriate Stripe Size, Access Policy, Read Policy, Write Policy, IO Policy, Disk Cache Policy, and Enable/Disable BGI for your application. For information about setting these parameters, see "Setting Drive Parameters" on page 80. 13. Set the drive size to a number in MB that is a size greater then the size of the RAID 1, RAID 5, or RAID 6 size listed in the disk group. Figure 27. Intel® RAID BIOS Console 2 - Spanning Multiple Arrays 14. Click Next if the application does not automatically progress to the next screen. 76 Intel® RAID Software User's Guide