Konica Minolta Kodak Truper 3610 User Guide - Page 28
Scanning with the flatbed (3210 Scanner), Flatbed Mode
View all Konica Minolta Kodak Truper 3610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Scanning with the flatbed (3210 Scanner) You can use the flatbed on the 3210 Scanner to scan a single sheet, exception documents or documents that you do not want to take apart before scanning (e.g., books, magazines). NOTE: Do not place floppy disks or any items containing magnetic media on the flatbed. 1. Raise the feeder tray up until the tray clicks into place. 2. Open the document cover. Document cover Feeder tray Standard mark 3. Select Flatbed Mode in the scanning application. 4. Place the document face down in the upper left corner of the flatbed glass. 5. Place the shorter edge of the document along the left edge of the flatbed glass. Match the shorter edge with the standard mark. 6. Place the longer edge of the document along the top edge of the flatbed glass. Match the longer edge with the standard mark. NOTE: If the document is not properly aligned, the document will not scan correctly. 7. Gently close the document cover. NOTES: • When scanning thick documents such as a bound book, only the areas that are touching the flatbed glass will be scanned. • Do not open or press down on the document cover during the scanning process. • When using the flatbed for a series of documents, keep the feeder tray raised. You only need to raise and lower the document cover when you scan each document. 3-10 A-61660 April 2010