Konica Minolta bizhub 25e bizhub 25e Printer Guide - Page 98
Underlined values are the default settings specified at the time of shipment.
View all Konica Minolta bizhub 25e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Function Description Settings CR / LF Set the operation to perform when CR / LF is CR / LF only received. (Only available for PCL5) CR + LF / LF only CR only / LF + CR CR + LF / LF + CR 1 Form Lines Sets the number of lines that can be printed Auto on a single page. (Only available for PCL5) Manual (5 to 128) *1 This item is only displayed when it is installed in the machine. 2 *2 The font pitch and font size settings may not be available, depending on the font that is set. NOTE Underlined values are the default settings specified at the time of shipment. 3 4 Operating on control panel Setting the print controller 4-9
1
2
3
4
Operating on control panel
Setting the print controller
4-9
Function
Description
Settings
CR / LF
Set the operation to perform when CR / LF is
received. (Only available for PCL5)
CR / LF only
CR + LF / LF only
CR only / LF + CR
CR + LF / LF + CR
Form Lines
Sets the number of lines that can be printed
on a single page. (Only available for PCL5)
Auto
Manual (5 to 128)
*1
This item is only displayed when it is installed in the machine.
*2
The font pitch and font size settings may not be available, depending on the font that is set.
NOTE
Underlined values are the default settings specified at the time of shipment.