Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Print Operation - Page 44
If the Additional Port Information Required appears, go to Step 10.
View all Konica Minolta bizhub C552 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5.1 Windows Vista/Server 2008 5 In Windows Server 2008: "Add Printer" Wizard appears. 5 Click "Add a local printer". The page for selecting a printer port appears. 6 Click "Create a new port", and then select the port type. % To use the LPR/Port 9100 protocol, select "Standard TCP/IP Port". % To use the SMB connection, select "Local Port". 7 Click [Next]. 8 Specify the IP address and port. % To use the LPR/Port 9100 protocol, select "TCP/IP Device", and then enter the IP address. % To use the SMB connection, enter "\\NetBIOS name\print service name" in the "Port Name" box. % Enter the same NetBIOS name and print service name specified in "Print Setting" in "SMB Setting". 9 Click [Next]. % If the "Additional Port Information Required" page appears, go to Step 10. % If the "Install the printer driver" page appears, go to Step 13. 10 Select "Custom", and then click [Settings]. 11 Change the settings according to the port, and then click [OK]. % For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box. % You must discriminate between upper and lower case letters when entering it. % For Port 9100, select "Raw", and then enter a RAW port number (initial setting: "9100") in the "Port Number" box. % If both LPR and Port 9100 are enabled on the printer, the printer driver is connected to the machine using LPR. 12 Click [Next]. The "Install the printer driver" page appears. bizhub C652/C652DS/C552/C552DS/C452 5-6