Kyocera FS-1050 Service Manual - Page 124
Attention, Ready
View all Kyocera FS-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Message Paper jam Paper path error Replace toner TK-17 Set paper Press GO Close top cover Toner low TK-17 Warning image adapt Warning low memory Warning Waste toner box Corrective action The ATTENTION indicator turns on and the READY indicator goes off. Indicates that paper is jammed in the printer. Open the top and/or front cover and pull out the jammed or misfed paper. The ATTENTION indicator turns on. There isn no paper cassette in the paper feeder, or the cassette is not inserted properly. The ATTENTION indicator turns on and the READY indicator goes off. Indicates that the printer has stopped because toner has run out. Replace the toner container with a new one. Clean the printer after replacement. The ATTENTION indicator turns on and the READY indicator flashes. Indicates there is no paper in the MP tray. Add paper to the tray. Press the GO key to resume printing. The ATTENTION indicator turns on and the READY indicator goes off. Indicates that either the top or front cover of the printer is open. Open and close again securely. The ATTENTION indicator flashes. Indicates that toner is running out. Replace the toner container with a new one. Clean the printer after replacement. The ATTENTION indicator flashes. Indicates that the print job cannot be done at current resolution because there is not enough internal memory. Try adding memory or changing resolution. The ATTENTION indicator flashes. Indicates that the printer's memory is running low because of the number of downloaded fonts and macros. Print a status page to see how much user memory is left and try deleting unnecessary fonts and macros. The ATTENTION indicator flashes. Indicates that the waste toner reservoir in the process unit is almost full. When it becomes full, the printer stops printing. FS-1050 6-4