Kyocera FS-1050 Service Manual - Page 20

(2) Places to avoid Avoid installing the printer in locations exposed to: • Direct drafts of hot or cold air. • Direct drafts of outside air. (Avoid locations next to outside doors.) • Sudden temperature or humidity changes. • Any source of high heat, such as a radiator or stove. • Excessive dust. Dust and smoke may cause contamination on the laser scanner window, causing print quality problem. • Vibration. • Ammonia fumes or other harmful fumes. (In case of fumigating the room or saturate it with insecticide, remove the printer first.) • Avoid greenhouse-like rooms. (Because of sunlight and humidity.) • Avoid enclosed spaces that block ventilation. • Avoid sites more than 6,500 feet or 2,000 meters above sea level. (3) Note on power Use only the power source voltage conforming to the printer's rated power voltage. Do not use other power sources. • Disconnect the printer from the power source before attempting removal or replacement of an electrical component or a printed-circuit board. • The printer should not be connected to a power source until the instruction is given to do so when performing tests described in this manual. • In connecting the printer power, exercise an extreme care in handling the power supply or any other electric parts which may give an electric shock. • Before performing maintenance or repair, power from both the power source and the associated peripheral devices (computer, sorter, etc.) should be disconnected, unless otherwise specified. • To avoid possible electrical shock, extreme caution must be exercised in handling the power cord and any other electrical part. • An easily accessible socket outlet must be provided near the equipment. WARNING As the disconnect device is not incorporated in the printer's AC primary circuit, an easily accessible socket outlet must be provided near the equipment. FS-1050 1-12