Kyocera FS-1050 Service Manual - Page 42
Menu selection system, Menu selection and sequence - drivers
View all Kyocera FS-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2-3-2 Menu selection system The MENU key on the operator panel allows you to use the menu selection system to set or change the printer environment such as the paper source, emulation, etc. Settings can be made when Ready is indicated on the printer message display. The printer obeys the most recently received printer settings sent from the application software, or from the printer driver, which take priority over operator panel settings. (1) Menu selection and sequence The following is the hierarchy diagram of the menu selection system of the printer. Ready PAR A4 MENU Print Menu Map Print Status Page Inter face Parallel Inter face USB Interface Serial These items will not show unless the printer is installed with the applicable option unit. > >Parallel I/F Nibble (high) >Parallel I/F Auto >Parallel I/F Normal >Parallel I/F High Speed > > >Bau rate 9600 >Data Bits 8 >Stop Bits 1 >Parity None >Protocol DTR (pos.)&XON Interface Option > >NetWare Off >NetWare On > >>NetWare Frame Auto >TCP/IP Off >TCP/IP > On >>DHCP On >>IP Address 000.000.000.000 >>Subnet Mask 000.000.000.000 >>Gateway 000.000.000.000 >Ether Talk Off >Opt. StatusPage Off Continued on next page. 2-19 FS-1050