Kyocera FS-1050 Service Manual - Page 39
Function, CANCEL, ENTER, Indicator, Condition, Description, ATTENTION - fs reset
View all Kyocera FS-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
LED Indicator 3 ATTENTION indicator Condition Flashing Lit Off Description Indicates that paper has run out, that memory is insufficient, that toner is low, or other warning messages. Indicates common errors (such as controller errors), when mechanical maintenance is needed or indicates a problem that requires a call to the service center. Indicates the printer is operating normally. (2) keys Key 4 GO key 5 CANCEL key 6 MENU key Function • Switches the printer online and offline (even offline, the printer can receive data). • Cancels specific errors. • Cancels a printing job. To cancel, proceed as follows: 1. Make sure if Processing appears on the message display. 2. Press the CANCEL key. 3. Print Cancel? appears on the message display and then interface to be canceled. Parallel Serial (appears only when an optional serial interface is present) Option (appears only when an optional network interface card is installed) Press the CANCEL key again if you wish to stop the cancellation of printing. 4. Select the interface to cancel using the or key and then press the ENTER key. Printing from the selected interface will stop. Cancelling data appears in the message display and printing stops after the current page is printed. • Resets numeric values or cancels a setting procedures. • When pressed during mode selection, it ends the setting and the printer returns to the Ready condition. • Used to select the emulation, font, character code set; to read a memory card; and more. FS-1050 2-16