Kyocera FS-1050 Service Manual - Page 56
Appendix B, Downloading errors
View all Kyocera FS-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4 Supervisor mode. The parallel interface is waiting for the firmware data. 5 Receiving the firmware data. 6 The system DIMM or flash ROM is overwritten with the new firmware data. 7 Firmware downloading is finished. (When more than one data are down loaded, the data display can be changed by pressing any key.) 8 Turn power switch off and on. 9 Check the that printer gets Ready. : Shows only included firmeware of boot program (".bcmp" extension file). A: u= Extracting W= Writing V= Verifiying B: Version C: Year/Month/Day D: [Checksum] E: Means more than one data From the previous page 4 Message display Supervisor mode parallel waiting 5 data receiving >>>>>>>>>>> 6 BootROM erase&write DIMM erasing #?? DIMM writing
3-11
FS-1050
4
Supervisor mode. The parallel interface is waiting for the firmware data.
5
Receiving the firmware data.
6
The system DIMM or flash ROM is overwritten with the new firmware data.
7
Firmware downloading is finished. (When more than one data are down loaded, the data display
can be changed by pressing any key.)
8
Turn power switch off and on.
9
Check the that printer gets
Ready
.
Confirm that the status page shows the new system firmware version (See
Appendix B
on page B-
4). If the message display indicates download error, refer to section
Downloading errors
on page 3-
14.
data receiving
>>>>>>>>>>>
BootROM
erase&write
DIMM erasing #??
Ready
Power switch: Off/On
B
A
C
D
E
80.00S
01/08/07[1234] 2
A
:
u
= Extracting
W
= Writing
V
= Verifiying
B
: Version
C
: Year/Month/Day
D
: [Checksum]
E
: Means more than one data
End
DIMM writing
<<<<<<<<<<u
7
8
9
4
5
6
: Shows only included
firmeware of boot program
(".bcmp" extension file).
From the previous page
Supervisor mode
parallel waiting
Message display