Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 116
For Windows NT, Suspend/Resume Options
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Problem The computer does not return from suspend mode, or the suspend indicator stays on and the computer does not work. The LCD is blank after resuming. Your computer does not enter suspend or hibernation mode. Action The computer automatically enters suspend or hibernation mode when the battery power is exhausted. Do one of the following: Replace the battery pack with a fully charged one and then press Fn. Connect the AC Adapter to the computer; then press Fn. Check if an external monitor was connected before the computer entered suspend mode. Do not disconnect the external monitor while the computer is in suspend mode or hibernation mode. If no external monitor is attached when the computer resumes, the LCD remains blank and output is not displayed. This restriction does not depend on the resolution value. Check if the suspend or hibernation mode is disabled. If you are using the AC Adapter and your computer is connected to a network, do the following: For Windows 95: 1. Start the ThinkPad Configuration program. 2. Click on Power Management ( ). 3. Click on the Hibernation tab. 4. Make sure that hibernation mode is enabled. For Windows NT: 1. Start the ThinkPad Configuration program. 2. Click on Power Management ( ). 3. Click on Suspend/Resume Options ( ). 4. Make sure that hibernation mode is enabled. 5. Click on OK. 110 IBM ThinkPad 600 Online Book