Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 125

Problem Your modem application does not work with the ThinkPad modem. Action Make sure that the internal modem port is enabled by opening the "Device Manager" window and running the Modem Wizard or by opening the ThinkPad Configuration program and doing as follows: 1. Click on Start. 2. Move the cursor to Programs and ThinkPad; then click on ThinkPad Configuration. 3. Click on Internal Modem ( ). 4. Select Enable. 5. Click on OK. For Windows 95 If the modem does not work correctly, Chapter 6, Resolving System Resource Conflicts , and correct the resource conflict. If the modem works correctly, specify the following modem settings by doing the following: 1. Double-click on My Computer, Control Panel, and Modem. The OEM Mig 33.6 Data Fax VOD Modem is highlighted. 2. Click on Properties, not Dialing Properties. 3. Click on the Connection tab. 4. If there is a check mark in the Wait for dial tone before dialing box, click and remove it. 5. Click on Advanced. 6. If there is a check mark in the Use error control box, click and remove it. 7. Add a check mark to the Use flow control by clicking on the box and make sure that Hardware (RTS/CTS) is selected. 8. Click on OK to close the window. 9. Click on OK and return to the "Modem Properties" window. 10. Click on Dialing Properties and fill in all boxes and click on either Tone dialing or Pulse dialing. Note: Most telephones today use tone dialing, where each button produces a different tone, instead of pulse dialing. 11. Click on OK. 12. Click on Close to close the window. 13. Close all active windows. Run your modem application again. Chapter 7. Solving Computer Problems 119