Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 177
Installing the ThinkPad Configuration Program for OS/2, Installing the Display Device Driver for OS/2
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Installing the ThinkPad Configuration Program for OS/2 To install the ThinkPad Configuration program for OS/2: 1 Start OS/2; then insert the Utility Diskette for OS/2 into the diskette drive. 2 Install the ThinkPad System Management device driver: a Open OS/2 System, System Setup, and then Install/Remove. b Select Device Driver Install and click on the Install... button. c Click on ThinkPad System Management Device Driver; then click on OK. 3 Open the OS/2 screen command prompt. 4 Type A:\INSTALL2 and press Enter. Follow the instructions on the screen. Installing the Display Device Driver for OS/2 The display driver enables you to use various screen resolutions and colors for the LCD and external monitor. The display driver also takes advantage of the computer's video capability. Before Installation Before you begin installing the display driver, set the display device mode to LCD: open the ThinkPad Configuration program and select the LCD ( ) icon, or at the command prompt, type PS2 SC LCD and press Enter. To install the ThinkPad display device driver for OS/2: 1 Start OS/2. 2 Insert Video Features Diskette III for OS/2 into the diskette drive: 3 Open the OS/2 full screen or OS/2 window and go to the A: prompt. Chapter 8. Installing Software 171