Lexmark T620 Service Manual - Page 131

4069-5XX/7XX Paper does not feed into the bin selected. 271 Paper Jam - Check Bin 1 displays. FRU 1 Deflector Deflector Spring Deflector Cover Deflector Cover Spring Shaft assemblies 2 Bin X Solenoid Assembly Control Board 3 Mechanical Linkage Motor Assembly Action Check all the bin parts for signs of missing or loose springs, binds in the deflector or deflector cover, broken or binding shaft assemblies or broken gear teeth. If incorrect, repair as necessary. Check the solenoid for any binds. Make sure the solenoid is contacting the latch correctly. If incorrect, repair as necessary. If the solenoid appears to be operating mechanically, check the resistance of the solenoid. It measures between 30 and 50 ohms. If incorrect, replace the failing solenoid assembly. If correct, replace the control board. If the DC motor is functioning properly, check the gears, clutch and other linkage parts for correct operation and any signs of wear, broken gear teeth or damaged parts. If incorrect, replace the mechanical linkage assembly/DC motor assembly. Diagnostic Information 2-103