Lexmark T620 Service Manual - Page 271

4069-5XX/7XX Upper Front Cover Hinge Assembly 1. Remove the upper front cover. 2. Remove the laser assembly cover. 3. Remove the C-clips (A) from the upper front cover hinge assembly left and right hinge pins and remove the pins. Note the pin orientation and the C-clip location on the inside of each hinge. 4. Detach the two springs (B) from the upper front cover hinges. 5. Disconnect the operator panel cable from the operator panel assembly. 6. Raise the upper front cover hinge assembly to a position that lets you lift the left pivot arm from the mounting bracket (C). 7. Lift the left pivot arm from the bracket and move the upper cover hinge assembly toward the left to clear the right upper cover pivot arm from the mounting bracket. 8. Remove the upper front cover hinge assembly. Repair Information 4-61