Lexmark T620 Service Manual - Page 200
Print Quality Test s, Single prints the Print Test once
View all Lexmark T620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
4069-5XX/7XX Envelope Feeder (if installed) For each input source selected you have the following choices: • Single (prints the Print Test Page once) • Continuous (continue printing the Print Test Page until Return or Stop is pressed). The contents of the Print Test Page varies depending on the media installed in the selected input source. Note: The Print Test Page always prints on one side of the paper, regardless of the duplex setting or the presence of a duplex option. If a source is selected that contains envelopes, an envelope test pattern is printed. If Continuous is selected, the test pattern is printed only on the first envelope. To run the Print Test Page: 1. Select Print Tests from the Diagnostic menu. 2. Select the media source. 3. Select Single or Continuous. - If Single is selected no buttons are active during printing. - If Continuous is selected, Return or Stop can be selected to cancel the test. Check each Test Page from each source to assist in Print Quality and Paper Feed problems. Print Quality Test Pages The purpose of this diagnostic function is to allow printing of the print quality test pages with the toner cartridge lockout function disabled. The print quality test consists of three pages. Page one contains a mixture of graphics and text. Pages two and three only contain graphics. If duplex is turned On, the pages are duplexed, otherwise the pages are printed on one side. The Print Quality Test pages are printed in English and must always be printed on letter, legal or A4 paper. Note: The print quality test pages can also be printed from the Configuration menu, however a cartridge must be installed with a 3-34 Service Manual