Lexmark T620 Service Manual - Page 62

4069-5XX/7XX User Message Primary 36 Resolution Reduced User Message Secondary 37 Insufficient Collation Memory 38 Memory Full 39 Complex Page 51 Defective Flash 52 Flash Full 53 Unformatted Flash Explanation The resolution of the page has been reduced from 600 dpi to 300 dpi to prevent a Memory Full error. This message can only occur if the Resolution Reduction setting is turned on. Note: 1200 dpi pages are not resolution reduced. If a 1200 dpi job runs out of memory, a Memory Full error is displayed. This message is displayed when the printer memory used to store pages is too full to collate the print job. This message is displayed when the printer memory used to store pages is full. This message is displayed when the page is too complex to print. This message is displayed when the printer detects a defective flash. This error may occur at power on, or during flash format and write operations. Press Go to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the problem is resolved. This message is displayed when there is not enough free space in the flash memory to hold the resources that have been requested to be written to flash. This message is displayed when the printer detects an unformatted flash at power on. Press Go to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the flash is formatted. 2-34 Service Manual