Lexmark T620 Service Manual - Page 186
First Sheet: Standard Bin, Second Sheet: Bin #1, Third Sheet
View all Lexmark T620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
4069-5XX/7XX The multipurpose tray and the envelope feeder do not have a paper low sensor. The multipurpose tray does not have a pass thru sensor. The following tray sensors are supported by this test: Source Tray Empty Sensor Tray 1 YES Tray 2 YES Tray 3 YES Tray 4 YES Tray 5 YES Multipurpose Tray YES Envelope Feeder YES Paper Low Sensor YES YES YES YES YES NO NO Pass Thru Sensor NO YES YES YES YES NO YES Output Bin - Feed to all Bins Test This test can be used to verify that the printer can feed media to the standard bin or any installed output options. No information will be printed on the test pages as the printhead is not turned on during the feed test. To run the Feed to all Bins Test: 1. Select Feed to all Bins Test from the Menu. 2. The media feeds from the default paper source. 3. The printer feeds a separate piece of media to the standard bin first, then it feeds a separate piece of media to each output bin installed in the following order: First Sheet: Standard Bin, Second Sheet: Bin #1, Third Sheet: Bin #2, Fourth Sheet: Bin #3, Fifth Sheet: Bin #4, Sixth Sheet: Bin #5, Seventh Sheet: Bin #6, Eighth Sheet: Bin #7, Ninth Sheet: Bin #8, Tenth Sheet: Bin #9, Eleventh Sheet: Bin #10, 3-20 Service Manual