Lexmark T620 Service Manual - Page 58
User Message, Primary, Message, Secondary, Explanation, X X=tray 1 thru 5. Try opening Tray X. - 250 paper jam
View all Lexmark T620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4069-5XX/7XX User Message Primary User Message Secondary Explanation 230 Paper Jam Check Duplex Leave Job in Finisher Primary: The paper is most likely jammed in the Duplex Unit. Remove the duplex front cover to access the jam area. If the paper is jammed in the rear of the duplex, then replace the duplex front cover and open the duplex rear door. If the paper is not jammed in the duplex unit, then it may be jammed in the rear of the printer. Open the printer rear door to access the jam. Secondary: When this message is displayed, do not remove accumulated sheets during the jam clearance procedure as the printer will not reprint the removed sheets. Also, if the accumulated sheets are removed, the portion of the job printed after the jam will not be stapled. 24X Paper Jam Check Tray X Leave Job in Finisher Primary: Paper is jammed around Tray X (X=tray 1 thru 5). Try opening Tray X. If the tray is difficult to remove, then you may have to remove the tray above or below tray X to remove the jammed pages. Secondary: When this message is displayed, do not remove accumulated sheets during the jam clearance procedure as the printer will not reprint the removed sheets. Also, if the accumulated sheets are removed, the portion of the job printed after the jam will not be stapled. 250 Paper Jam Check MP Feeder Leave Job in Finisher Primary: Paper is jammed in the multipurpose feeder. Secondary: When this message is displayed, do not remove accumulated sheets during the jam clearance procedure as the printer will not reprint the removed sheets. Also, if the accumulated sheets are removed, the portion of the job printed after the jam will not be stapled. 2-30 Service Manual