Lexmark T620 Service Manual - Page 47
XX/7XX, Envelope Feeder Sub Error Codes, Service - Fuser Error Wrong Fuser Lamp Installed
View all Lexmark T620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4069-5XX/7XX First 6 Bytes Sub Error Code Data - Note: xx can be any value Explanation 925 Service - Fuser Error (Wrong Fuser Lamp Installed) Note: The Sub Error Codes below are only for an incorrect lamp being installed. EN 07 xx yy zz 1 EN -- -- -- 2 This error code is generated anytime an incorrect lamp is detected. xx=00 Lamp detection performed and found an error. 01 It took long to do lamp detection and NVRAM detected a previous wrong lamp detected. yy=Actual Temperature zz=The temperature that the fuser was trying to reach. Envelope Feeder Sub Error Codes First 6 Bytes Sub Error Code Data - Note: xx can be any value Explanation 84 xx 17 There is an envelope in the feeder during POST. Diagnostic Information 2-19
Diagnostic Information
2-19
4069-5XX/7XX
Envelope Feeder Sub Error Codes
925 Service - Fuser Error (Wrong Fuser Lamp Installed)
Note:
The Sub Error Codes below are only for an incorrect lamp being
installed.
EN 07 xx yy
zz 1
EN -- -- -- 2
This error code is generated anytime an incorrect lamp is
detected.
xx=00 Lamp detection performed and found an error.
01 It took long to do lamp detection and NVRAM detected
a previous wrong lamp detected.
yy=Actual Temperature
zz=The temperature that the fuser was trying to reach.
First 6
Bytes Sub
Error Code
Data - Note:
xx can be
any value
Explanation
84 xx 17
There is an envelope in the feeder during POST.
First 6
Bytes Sub
Error Code
Data - Note:
xx can be
any value
Explanation