Pioneer VSX-1121-K Owner's Manual - Page 29
Connecting AM/FM antennas, FM UNBAL 75
View all Pioneer VSX-1121-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connecting your equipment 03 Connecting AM/FM antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Connecting external antennas below). Connecting external antennas To improve FM reception, connect an external FM antenna to FM UNBAL 75 Ω. 1 2 75 Ω coaxial cable 5 fig. a AM LOOP ANTENNA fig. b 3 FM UNBAL 75 4 fig. c AM LOOP ANTENNA FM UNBAL 75 To improve AM reception, connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna. For the best possible reception, suspend horizontally outdoors. Outdoor antenna 1 Pull off the protective shields of both AM antenna wires. 2 Push open the tabs, then insert one wire fully into each terminal, then release the tabs to secure the AM antenna wires. 3 Fix the AM loop antenna to the attached stand. To fix the stand to the antenna, bend in the direction indicated by the arrow (fig. a) then clip the loop onto the stand (fig. b). • If you plan to mount the AM antenna to a wall or other surface, secure the stand with screws (fig. c) before clipping the loop to the stand. Make sure the reception is clear. 4 Place the AM antenna on a flat surface and in a direction giving the best reception. 5 Connect the FM wire antenna into the FM antenna socket. For best results, extend the FM antenna fully and fix to a wall or door frame. Don't drape loosely or leave coiled up. AM LOOP ANTENNA FM UNBAL 75 Indoor antenna (vinyl-coated wire) 5 m to 6 m (16 ft. to 20 ft.) 29 En