Brother International HE-800B Instruction Manual - English - Page 101
Cutter and upper thread trimmer touch, 11-21. Seam is cut
View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
11. TROUBLESHOOTING 11-20. Cutter and upper thread trimmer touch Items with a "*" in the "Page" column should only be handled by a qualified technician. Cause Check Remedy Upper thread trimmer Check if the cam opens the stop plate. Adjust the cam position. * If the feed mechanism operates when the cam has not opened the stop plate, the cutter will bump against the upper thread trimmer. Page 69* 4018Q 11-21. Seam is cut Items with a "*" in the "Page" column should only be handled by a qualified technician. Cause Check Remedy Setting the length of Length of the hole the hole Set parameter number 02 to the same value as the length of the cutter being used. Setting the cutter Cutting of zigzag seam spacing ・ Use parameter number 04 to set the cutter X space. ・ Use parameter number 03 to set the correction of the cutter X position. Cutter Cutter play Cutter knife bending Adjust the cutter bar guide so that the cutter operates smoothly with no play. Use the cutter holder (option) to prevent the cutter knife from becoming bent. Page 35* 35* * * 4019Q HE-800B 92