Brother International HE-800B Instruction Manual - English - Page 58

USING THE SEWING MACHINE SEWING OPERATION, Test feeding in progress, <Manual sewing method&gt

Page 58 highlights

6. USING THE SEWING MACHINE (SEWING OPERATION) 3 Depress the treadle to the 2nd step (C). 4823M 4822M 4 Test feeding in progress The work clamp will drop, and test feeding will start. * However, if the sewing data is protruding outside the sewing area, "OVER SEW AREA" will be displayed for 1.5 seconds, and test feeding will not be carried out. 4824M ・ When the treadle is returned to the neutral position, test feeding will be interrupted. ・ If the treadle is depressed to the 2nd step (C), test feeding operation will move forward. ・ Test feeding operation moves forward by one stitch each time the key is pressed. (The key changes operation to the opposite direction.) ・ When the cutter operating position is reached, the buzzer will sound and the cutter icon will be displayed for one second. * If you press the AUTO key, test feeding mode will be exited and the sewing machine will switch to the automatic sewing standby condition. Turn the pulley (4) by hand in the direction of the arrow during test feeding. ・ Feeding will move forward by one stitch for each rotation of the pulley (4). ・ Test feeding operation by turning the pulley (4) by hand also moves the needle up and down, so if material has been set and the sewing machine is threaded with thread, manual sewing can be carried out. Number of stitches remaining 5 Test feeding complete When the number of stitches remaining reaches "0", depress the treadle to the 2nd step (C). 4825M 4822M ・ The above message will be displayed for 1.5 seconds. ・ The work clamp will rise, and test feeding mode will be exited. 4921M NOTE: If you press the RESET key during test feeding or after test feeding is complete, the needle bar and the work clamp will carry out home position detection, and then they will return to the sewing start position. 49 HE-800B

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

HE-800B
6. USING THE SEWING MACHINE (SEWING OPERATION)
49
3
Depress the treadle to the 2nd step (C).
The work clamp will drop, and test feeding will start.
*
However, if the sewing data is protruding outside the sewing
area, “OVER SEW AREA” will be displayed for 1.5 seconds, and
test feeding will not be carried out.
4
Test feeding in progress
When the treadle is returned to the neutral position, test feeding will be
interrupted.
If the treadle is depressed to the 2nd step (C), test feeding operation will
move forward.
Test feeding operation moves forward by one stitch each time the
key is pressed.
(The
key changes operation to the opposite direction.)
When the cutter operating position is reached, the buzzer will sound and
the cutter icon will be displayed for one second.
*
If you press the AUTO key, test feeding mode will be exited and the
sewing machine will switch to the automatic sewing standby condition.
<Manual sewing method>
Turn the pulley (4) by hand in the direction of the arrow
during test feeding.
Feeding will move forward by one stitch for each
rotation of the pulley (4).
Test feeding operation by turning the pulley (4) by
hand also moves the needle up and down, so if
material has been set and the sewing machine is
threaded with thread, manual sewing can be carried
out.
5
Test feeding complete
When the number of stitches remaining reaches “0”, depress the treadle to the 2nd step (C).
The above message will be displayed for 1.5 seconds.
The work clamp will rise, and test feeding mode will be exited.
NOTE:
If you press the RESET key during test feeding or after test feeding is complete, the needle bar and the work clamp will
carry out home position detection, and then they will return to the sewing start position.
Number of stitches
remaining
4824M
4822M
4825M
4822M
4921M
4823M