Brother International HE-800B Instruction Manual - English - Page 16
Installing the machine head, 3-6. Installing the head rest, Install the machine head with
View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3. INSTALLATION 3-5. Installing the machine head 4738M 1. Place the two bed hinges (1) so that they are level as shown in the illustration at left, and then place the machine head gently on top of the bed base (3) so that the cables (2) do not get clamped. NOTE: ・ The bed base (3) is made from plastic, so be careful not to hit it with the machine head when placing the machine head on top of it. ・ Make sure that the felt support (4) do not touch the bed base (3). 2. Install the machine head with the four spring washers (5) and four bolts (6). 3-6. Installing the head rest 4739M (1) Head rest NOTE: Tap the head rest (1) securely into the table hole. If the head rest (1) is not pushed in as far as it will go, the machine head will not be sufficiently stable when it is tilted back. 4740M 7 HE-800B