Brother International HE-800B Instruction Manual - English - Page 26
INSTALLATION, <200 V system>, none of the cords are being clamped
View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. INSTALLATION CAUTION Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric shock, and problems with correct operation may also occur. Connect cords that match the voltage specifications. Operator (1) Power switch (2) Screws [2 pcs] 4145M 4757M (3) 3-pin power supply connector (4) Power cord (5) Staples [5 pcs] 1. Attach an appropriate plug to the power cord (4). (The green and yellow wire is the ground wire.) 2. Insert the power plug into a properly-grounded electrical outlet. NOTE: • Take care when tapping in the staples (5) to make sure that they do not pierce the cords. • Do not use extension cords, otherwise machine operation problems may result. 3. Use the six screws to tighten the cover of the control box. Check that none of the cords are being clamped by the cover at this time. Green and yellow wire (ground wire) 17 HE-800B