Brother International HE-800B Instruction Manual - English - Page 65
List of memory switch settings, OFF: No assignment - he 800 b 2
View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION) 7-2-1. List of memory switch settings No. Setting items Work clamp height when treadle is depressed 001 Settings can be made in units of 1 mm. Setting range 1-13 Default value 13 Work clamp height when treadle is at neutral position 002 Settings can be made in units of 1 mm. 1-13 10 Work clamp operation when treadle is depressed to the 1st step. 1-2 1 * When using a triple pedal (optional part), this number will not be displayed. 003 1: Work clamp does not drop to intermediate position 2: Work clamp drops to intermediate position Work clamp height (mm) when dropped to intermediate position * Displayed when No. 003 above is set to "2". 004 Settings can be made in units of 0.1 mm. 0.1-8.0 1.0 Parameter number assignment for FUNC key OFF, 1-60 Functions can be assigned to the FUNC key to make it operate as a seventh shortcut key. 300 OFF: No assignment (The help screen is displayed while the FUNC key is pressed.) 1-60: When the FUNC key is pressed, the parameter setting screen for the number which has been set is displayed. OFF Display screen contrast 1-15 10 301 You can change the degree of contrast. The higher the number, the stronger the contrast. Counter display during automatic sewing mode 1: Lower thread 1 The contents appearing at (1) in the display during automatic sewing mode counter can be set to either the lower thread counter display or the production counter 2: Production display. counter 302 4926M Correction of cutter Y position -0.800-0.800 0 The cutter position relative to the sewing pattern can be corrected in the Y 700 direction. Settings can be made in units of 0.025 mm. HE-800B 56