Brother International HE-800B Instruction Manual - English - Page 44
Parameter list, other, parameters. Refer to 5-4-4. Main restrictions when setting parameters. - dimensions
View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION) 5-4-1. Parameter list ・Parameters that are not applicable to a particular program will be skipped and not displayed. ・The allowable setting range for some parameters may vary from the range specified, depending on the settings of other parameters. (Refer to "5-4-4. Main restrictions when setting parameters".) No. Setting items 01 Sewing pattern 1: Rectangle Setting range 1-20: Buttonhole stitch 21: Straight tack stitch 2: Radial Unit Initial value 1 1 3: Round 4: Radial-rectangle 5: Round-rectangle 6: Eyelet-rectangle 7: Rectangle-radial 8: Round-radial 9: Eyelet-radial 10: Rectangle-round 11: Radial-round 12: Eyelet-round 13: Rectangle-taper tack 14: Radial-taper tack 15: Round-taper tack 16: Eyelet-taper tack 17: Rectangle-tack 18: Radial-tack 19: Round-tack 20: Eyelet-tack 21: Straight bar tack 02 Length of the hole (cutter length) 03 Correction of cutter X position 04 Cutter X space 4.0-32.0 mm 0.1 13.0 However, it must be less than (*1) the sewing area. -0.50-0.50 mm 0.05 0.00 -0.40-1.00 mm 0.05 0.40 (*1) If the work clamp dimensions have been set to 5.4x19 mm, the initial value for the length of the hole will be 6.0 mm. 35 HE-800B