Home » Brother International Manuals » Sewing Machines » Brother International HE-800B » Manual Viewer

Brother International HE-800B Instruction Manual - English - Page 56

USING THE SEWING MACHINE (SEWING OPERATION), 6-1. Automatic sewing (Automatic sewing mode)

Get Brother International HE-800B PDF manuals and user guides

View all Brother International HE-800B manuals

Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

6. USING THE SEWING MACHINE (SEWING OPERATION) 6. USING THE SEWING MACHINE (SEWING OPERATION) CAUTION Turn off the power switch at the following times, otherwise the machine may operate if the treadle is depressed by mistake, which could result in injury. ▪ When replacing the bobbin and needle ▪ When not using the machine and when leaving the machine unattended Use threading mode or turn off the power first in order to carry out threading. Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. When holding the material, place your right hand at the back and your left hand at the front. If your left hand is toward the back, it may get caught in the feed arm when it operates or it might touch the moving parts of the needle trimmer and injury may result. NOTE: • The feed arm (1) can move, so be careful of the clearance. • When using the machine, check that the oil is visible through the oil cap. If it cannot be seen, stop the machine and eliminate the cause of the problem. 4893M 6-1. Automatic sewing (Automatic sewing mode) • When carrying out automatic sewing for the first time, be sure to carry out a test sewing first. • In addition, if using the sewing machine when the ambient temperature is cold, carry out several test sewing operations to allow the motor to warm up. 1 Switch the mode to automatic sewing mode. 4815M 2 Select the desired program number (2). Information such as the sewing pattern (1), the program number (2), the cutter operation (3) and the lower thread counter (4) will appear in the display. 4816M Independent program (Refer to P. 33) Cycle program (Refer to P. 52) 4787M 47 4817M The program number (2) changes in the order shown in the illustration each time the key is pressed. (The key changes the order in the opposite direction.) HE-800B

Section	Page
COVER	1
SAFETY INSTRUCTIONS	3
[1] Safety indications and their meanings	3
[2] Notes on safety	4
[3] Warning labels	6
CONTENTS	8
1. NAMES OF MAJOR PARTS	10
2. SPECIFICATIONS	11
2-1. Specifications	11
2-2. Standard sewing pattern list	12
3. INSTALLATION	13
3-1. Table processing diagram	13
3-2. Installing the control box	14
3-3. Installing the flange nut	15
3-4. Installing the bed base	15
3-5. Installing the machine head	16
3-6. Installing the head rest	16
3-7. Installing the operation panel	17
3-8. Installing the oil stopper plate	18
3-9. Connecting the cords	18
3-10. Connecting the ground wire	21
3-11. Installing the treadle connecting rod	22
3-12. Installing the cotton stand	23
3-13. Installing the eye guard	23
3-14. Lubrication	24
3-14-1. Lubricating the bed base	24
3-14-2. Lubricating the arm	24
3-14-3. Lubricating the rotary hook	25
3-15. Connecting the power cord	25
3-16. Checking the safety switch	28
3-17. Installing the motor cover	28
3-18. Installing the auxiliary table	29
4. PREPARATION BEFORE SEWING	30
4-1. Installing the needle	30
4-2. Threading the upper thread	31
4-3. Winding the lower thread	33
4-4. Installing the bobbin case	34
4-5. Thread tension	35
4-5-1. Lower thread tension	35
4-5-2. Upper thread tension	36
4-5-3. Thread take-up spring height	37
4-5-4. Thread take-up spring tension	37
4-5-5. Adjusting arm thread guide	37
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)	38
5-1. Name and function of each operation panel item	38
5-2. Starting the sewing machine	40
5-3. Operating the treadle	41
5-4. Program setting method	42
5-4-1. Parameter list	44
5-4-2. Setting the length of the hole	50
5-4-3. Buttonhole sewing size	50
5-4-4. Main restrictions when setting parameters	50
5-5. Rear tack vector shape programs	51
5-6. Underlay programs	52
5-7. Cutter operation	53
5-8. Copying programs	54
6. USING THE SEWING MACHINE (SEWING OPERATION)	56
6-1. Automatic sewing (Automatic sewing mode)	56
6-2. Test feeding mode	57
6-3. Using the STOP switch	59
6-3-1. Pausing sewing during automatic sewing	59
7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)	61
7-1. Using cycle programs	61
7-2. Setting memory switches	64
7-2-1. List of memory switch settings	65
7-3. Resetting the data (initialization)	66
7-4. Changing the lower thread counter setting	67
7-5. Changing the production counter setting	68
7-6. Displaying the help screen	69
8. CLEANING	70
8-1. Cleaning	70
8-2. Draining the oil	71
8-3. Cleaning the control box air inlet port	71
8-4. Cleaning the eye guard	72
8-5. Checking the needle	72
8-6. Cleaning the length feed plate	72
9. STANDARD ADJUSTMENTS	73
9-1. Adjusting the needle bar height	73
9-2. Adjusting the needle and hook timing	74
9-3. Adjusting the clearance between needle and hook tip	75
9-4. Adjusting the inner rotary hook and rotary hook holder overlap	75
9-5. Adjusting the work clamp pressure	75
9-6. Adjusting the cutter installation	76
9-7. Adjusting the installation height of the upper thread trimmer	77
9-8. Adjusting the upper thread trimmer opening timing	78
9-9. Adjusting the lower thread clamp timing	79
9-10. Adjusting the bobbin presser	79
10. TABLE OF ERROR CODES	80
11. TROUBLESHOOTING	86
11-1. Upper thread breakage	86
11-2. Skipped stitches	87
11-3. Uneven seams (1) …… At the sewing start	89
11-4. Uneven seams (2) …… Lower thread is lifted up at the sewing start	90
11-5. Uneven seams (3) ……Seam lifts up at the sewing start	90
11-6. Uneven seams (4) …… Uneven sewing pitch at the sewing start	91
11-7. Uneven seams (5)……Poor rounding of seam	91
11-8. Uneven seams (6) …… Around rear tack or front tack	91
11-9. Uneven seams (7) …… Loose thread end at end backtack	91
11-10. Uneven seams (8) …… Thread sticking out at end backtack	92
11-11. Uneven seams (9) …… Sticking in needle plate	92
11-12. Uneven seams (10) …… All stitches	93
11-13. Upper thread run out	94
11-14. Unraveling of thread trimmed by upper thread trimmer assembly	96
11-15. Upper thread miss-trimming	97
11-16. Needle strikes upper thread trimmer	98
11-17. Needle breakage	99
11-18. Imperfect cutter function (imperfect material cutting)	100
11-19. Cutter does not return	100
11-20. Cutter and upper thread trimmer touch	101
11-21. Seam is cut	101
11-22. Upper thread miss-winding	102
11-23. Work clamp is not raised (1)…… Pulse motor stepping sound cannot be heard	102
11-24. Work clamp is not raised (2)…… Pulse motor stepping sound can be heard	103
11-25. Lower thread is not trimmed (pulls when material is removed)	104
11-26. Feed mechanism does not operate or motor is out of step	104
11-27. Needle does not zigzag or noise occurs when needle zigzags	105
11-28. Sewing machine stops during sewing	105
11-29. Upper shaft does not rotate as far as the needle up stop position	105
11-30. Operation panel display freezes and operation is not possible	105