Brother International HE-800B Instruction Manual - English - Page 57
Test feeding mode, stitches 3 will appear in the display.
View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6. USING THE SEWING MACHINE (SEWING OPERATION) 3 Place the material under the work clamp, and then depress the treadle (5) to the 1st step (B). The work clamp will drop. 4 Depress the treadle (5) to the 2nd step (C). 4819M 5 To repeat the sewing operation, repeat steps 3 and 4 above. 4818M Sewing will then start. * When sewing is complete, the work clamp will rise. 6-2. Test feeding mode This mode lets you check needle zigzag, work clamp and length feed plate movement in the sewing pattern which has been programmed without actually sewing the program. (The needle will not move up and down and the cutter will not operate either.) 1 Switch the mode to test feeding mode. 4820M 4785M 2 Select the program number (2) for test feeding. The sewing pattern (1), the program number (2) and the number of stitches (3) will appear in the display. Independent program (Refer to P. 33) Cycle program (Refer to P. 52) 4787M 4821M The program number (2) changes in the order shown in the illustration each time the key is pressed. (The key changes the order in the opposite direction.) HE-800B 48