Brother International HE-800B Instruction Manual - English - Page 41

5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION) 5-3. Operating the treadle After sewing 3906Q [4] [1] [2] [3] Depressed backward position (Insertion and removal of the material) Neutral position Treadle 1st step (when positioning the material) Treadle 2nd step (when starting) 1. When the treadle is not depressed (A), the work clamp is at the neutral position. (Figure [1]) 2. When the treadle is depressed to the 1st step (B), the work clamp will drop. (Figure [2]) When the treadle is released, the work clamp will return to the neutral position. (Figure [1]) 3. When the treadle is depressed to the 2nd step (C), the machine starts sewing. (Figure [3]) 4. When the treadle is depressed backward to the backward position (D), the work clamp will lift up to higher than the neutral position. (Figure [4]) This is useful for inserting and removing the material. * The work clamp rises while the treadle is being depressed backward, and it returns to the neutral position when the treadle is released. HE-800B 32