Brother International HE-800B Instruction Manual - English - Page 30
PREPARATION BEFORE SEWING, 4-1. Installing the needle
View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. PREPARATION BEFORE SEWING 4. PREPARATION BEFORE SEWING 4-1. Installing the needle CAUTION Turn off the power switch before installing the needle, otherwise the machine may operate if the treadle is depressed by mistake, which could result in injury. Use a Schmetz Nm 134 needle. 1. Loosen the set screw (1). 2. Insert the needle as far as it will go so that the groove is facing toward you. 3. Securely tighten the set screw (1). [At the time of shipment] Spec. Needle -2 134 Nm90 -3 134 Nm75 Groove Front 4764M 21 HE-800B
HE-800B
4. PREPARATION BEFORE SEWING
21
4. PREPARATION BEFORE SEWING
4-1. Installing the needle
CAUTION
Turn off the power switch before installing the needle, otherwise the machine may operate if the treadle is
depressed by mistake, which could result in injury.
Use a Schmetz Nm 134 needle.
1. Loosen the set screw (1).
2. Insert the needle as far as it will go so that the groove
is facing toward you.
3. Securely tighten the set screw (1).
[At the time of shipment]
Spec.
-2
-3
Needle
134 Nm90
134 Nm75
Front
Groove
4764M