Brother International HL-1070 Technical Reference - Page 139
Using HP-GL/2 Color Mode, PCL5C - 9
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
♣ Black reference for value #1, #2, #3 ♣ This mode specifies the black value (the highest level of density). ♣ Each value indicates a color as follows; #1: red #2: green #3: blue Range: -32767 ~ 32767 • When the encoding mode is 2 or 3, this setting is valid. 2001/10/02 2.3. Using HP-GL/2 Color Mode Two methods are provided to set the color mode in the HP-GL/2 mode. Set the color mode by the PCL command, then transfer to the HP-GL/2 mode. Execute the NP command. For the details on how to use the color selections in the HP-GL/2 mode, refer to Section 6 'HP-GL/2'. CHAPTER 3 "PCL5C" - 9
2001/10/02
CHAPTER 3 "PCL5C" - 9
:
Black reference for value #1, #2, #3
:
This mode specifies the black value (the highest level of density).
:
Each value indicates a color as follows;
#1:
red
#2:
green
#3:
blue
Range: -32767 ~ 32767
•
When the encoding mode is 2 or 3, this setting is valid.
2.3.
Using HP-GL/2 Color Mode
Two methods are provided to set the color mode in the HP-GL/2 mode.
Set the color mode by the PCL
command, then transfer to the HP-GL/2 mode.
Execute the
NP
command.
For the details on how to use the color selections in the HP-GL/2 mode, refer to Section 6 ‘HP-GL/2’.