Brother International HL-1070 Technical Reference - Page 409
Copy Card For HL-1660e/2060/2400C/2400Ce/3400CN/2460/3260N Only, ESC CR ! 12357F, CARD1 W ERROR
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 409 highlights
2001/10/02 3.7 Copy Card (For HL-1660e/2060/2400C/2400Ce/3400CN/2460/3260N Only) Command ESC CR ! 12357F Available Devices F, A Description 1) Flash memory card After executing a logical format on the transfer device, this command copies to the transfer device only when the two devices have the same memory size. It is essential that the transfer device has already been formatted. The specify device command allows you to specify the source device. Specified Device Copy Order 1 Slot 2 → Slot 1 2 Slot 1 → Slot 2 ** "Slot 2 → Slot 1" is the default setting. 2) ATA flash memory card After executing a logical format on the transfer device, this command copies to the transfer device file by file from the master device. If the memory runs short in the transfer device during the data transfer, the copy process is discontinued. Data written to the transfer device before the error is valid in the device. The specify device command allows you to specify the source device. Specified Device Copy Order 1 Slot 2 → Slot 1 2 Slot 1 → Slot 2 ** "Slot 2 → Slot 1" is the default setting. Error 43 CARD1 W ERROR 43 CARD2 W ERROR (HL-2460 / 3260N) Specified Device 1 2,3 Copy Order Internal HDD → Slot 1 Slot 1 → Internal HDD Note that this command cannot copy the spool data. Error 43 CARD ERROR 43 HDD ERROR APPENDIX B - FLASH/ PCMCIA CARD COMMANDS - 15
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/409.png)