Brother International HL-1070 Technical Reference - Page 281
Esc P, Epson - 18
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
2001/10/02 • You cannot use the backspace, BS, code in proportional spacing mode. • If you change the character pitch using Esc P or Esc M, proportional spacing is automatically turned off. LPRINT CHR$(27); CHR$(112); CHR$(1); 'Turn proportional spacing on Select condensed character mode I SI (15) • This command selects condensed character mode. Subsequent text characters are condensed horizontally when printed. • Selecting proportional spacing cancels condensed character mode. LPRINT CHR$(15); 'Set condensed character mode Select condensed character mode II EscSI (27)(15) • This command selects condensed character mode. Subsequent text characters are condensed horizontally when printed. • Selecting proportional spacing cancels condensed character mode. • This command functions exactly like the SI control code. LPRINT CHR$(27); CHR$(15); 'Set condensed character mode Cancel condensed character mode DC2 (18) This command cancels condensed character mode. Subsequent text characters are printed normally. LPRINT CHR$(18); 'Cancel condensed character mode Select emphasized character mode EscE (27)(69) This command turns emphasized character mode on. Subsequent text is printed with a bold stroke width. LPRINT CHR$(27); CHR$(69); 'Turn emphasized character mode on Cancel emphasized character mode EscF (27)(70) This command turns emphasized character mode off. Subsequent text is printed with a medium stroke width. LPRINT CHR$(27); CHR$(70); 'Turn emphasized character mode off Select double-strike mode EscG (27)(71) This command turns double-strike mode on. Subsequent text is printed with a bold stroke width. LPRINT CHR$(27); CHR$(71); 'Turn double-strike printing mode on Cancel double-strike mode EscH (27)(72) This command turns double-strike mode off. Subsequent text is printed with a medium stroke width. LPRINT CHR$(27); CHR$(72); 'Turn double-strike printing mode off Select / cancel double-width printing EscWn (27)(87)n n • This command turns double-width printing on or off. • If n is set to 1 subsequent text is printed using double-width characters. The line spacing setting is doubled. • If n is set to 0 subsequent text is printed using normal sized characters. The previous character pitch setting is restored. CHAPTER 6 EPSON - 18
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/281.png)