Brother International HL-1070 Technical Reference - Page 401
Save Data Command, Esc & F # Y, Memory Full, Card1 W Error, Device1 W Error, Service E74
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 401 highlights
2001/10/02 3.3 Save Data Command 3.3.1 Save specified type Command ESC CR ! 12345F type(4byte) size(4byte) data... ** type = MCRO, DATA Available Devices F, A, H Description This command saves data of the specified type with the data ID which is set with the ESC & f # Y (Macro ID Configuration) command. If there is insufficient memory in the printer to store the data, a memory full error occurs. When the printer supports two or more storage devices, the command saves the data onto the device specified by the select storage device command. When only one device is enabled, the command saves onto that device. Error HL-1660e/2060/2400C: 34 MEMORY FULL 43 CARD1 W ERROR 43 CARD2 W ERROR HL-2400Ce/3400CN: 43 DEVICE1 W ERROR 43 DEVICE2 W ERROR 43 DEVICE3 W ERROR HL-2460/3260N: 43 CARD ERROR 43 HDD ERROR HL-1650/1670N: 43 SERVICE E74 APPENDIX B - FLASH/ PCMCIA CARD COMMANDS - 7
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/401.png)