Brother International HL-1070 Technical Reference - Page 273
Select / cancel unidirectional printing, Set data MSB to 0
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
2001/10/02 Set inter-character space EscSPn (27)(32)n n • This command allows you to set the space between successive characters. • n is the space between characters in multiples of 1/120". • n must be in the range 0 to 127. LPRINT CHR$(27); CHR$(32); CHR$(5); 'Set 1/24" char space Select justification mode Escan (27)(97)n n • This command allows you to select the justification mode for subsequent text. • Set n to 0 to select left justification. • Set n to 1 to centre subsequent text. • Set n to 2 to select right justification. • Set n to 3 to select full justification (text will be both left and right justified). • The default justification mode is left justification. • The horizontal tab, HT, and backspace, BS, control codes can only be used in left justification mode. LPRINT CHR$(27); CHR$(97); CHR$(2); 'Right justify text Set absolute print position Esc$n1n2 (27)(36)n1n2 n1n2 • This command allows you to print characters a specified distance in from the left margin. • The unit of movement is 1/60". • The specified distance to be moved is n +(n *256)/120". 12 • If the specified position is to the right of the right margin the command is ignored. LPRINT CHR$(27); CHR$(36); CHR$(120); CHR$(0); 'Print a line 2" in Set relative print position Esc\n1n2 (27)(92)n1n2 n1n2 • This command allows you to print characters a specified distance to the left or right of the current print position. • The unit of movement is 1/120". • If you wish to move the print position to the right, the distance the print position is to be moved is calculated as (n +(n *256))/120". 12 • If you wish to move the print position to the left, the distance the print position is to be moved is calculated as (65536 - (n +(n *256)))/120". 12 • If the specified position is beyond the left or right margin the command is ignored. LPRINT CHR$(27); CHR$(36); CHR$(180); CHR$(0); 'Print a line 1.5" to the right Select unidirectional printing Esc< (27)(60) This command has no effect. Select / cancel unidirectional printing EscU (27)(85) This command has no effect. Set data MSB to 0 Esc= (27)(61) • This command enables you to set the most significant bit of incoming data bytes to 0. • This command does not affect data comprising a graphics image or data that defines a downloadable character. LPRINT CHR$(27); CHR$(61); 'Set MSB to 0 CHAPTER 6 EPSON - 10
![](/manual_guide/products/brother-international-hl1070-technical-reference-329cc8c/273.png)