Brother International HL-1070 Technical Reference - Page 40
Job separation command For HL-3260N/2460, Esc%-12345X 273745495051525388
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2001/10/02 • # = 2 indicates the back face. If the currently processing page is an odd page, the printer finishes the processing of the page. If the odd page has already been processed onto the page and the even page has not been processed yet, this command is ignored. If the currently processing page is an even page, the printer finishes the processing of the page and attaches a dummy (white) page. If both an even and odd page have been processed and the next odd page has not been processed yet, only a dummy (white) page is attached. 4.1.8. Job separation command (For HL-3260N/2460) Esc&l1T (27)(38)(108)(49)(84) It is recommended to insert this command at the end of each job. 4.1.9. Reset EscE (27)(69) • A printer reset restores the user default environment, deletes any temporary fonts and temporary macros. • Any pages that have been transmitted are printed out. • You can also perform a printer reset using the printer's control panel or remote printer console program (see the User Guide). 4.1.10. Reset to factory default settings EscCRFD (27)(13)(70)(68) • This command causes a factory reset to be performed, restoring all the printer's factory default settings. See the section "Factory default environment" for a list of the factory default settings. • You can also perform a factory reset using the printer's control panel or remote printer console program (see the User Guide). 4.1.11. Reset to user settings EscCR!#R (27)(13)(33)#(82) # • # can be 0, 1 or 2. • #0 indicates the current settings are restored. Unlike the Esc E reset command, the Esc CR!0R command resets the input buffer. • #1 indicates the user settings 1 are restored, if the printer supports multi user settings. • #2 indicates the user settings 2 are restored, if the printer supports multi user settings. • Depending on the model, you may be able to lock the control panel settings ("SETTING LOCK=ON"). In that case, parameters 1 and 2 are ignored. 4.1.12. Printer self test Escz (27)(122) A printer self test causes a test sheet to be printed out to show that the machine is working properly. Depending on the model, you may also see the test pattern for HRC setting. 4.1.13. Exit current emulation mode Esc%-12345X (27)(37)(45)(49)(50)(51)(52)(53)(88) • When the printer receives this command, all page data already received is printed out. • All settings are reset to the user settings. • Exits the current emulation mode. CHAPTER 2 "PCL" - 20